Pulmonary function tests
Pulmonary function tests are a group of tests that measure how well the lungs take in and release air and how well they move gases such as oxygen from the atmosphere into the body's circulation.
PFTs; Spirometry; Spirogram; Lung function tests
How the Test is Performed
Spirometry measures airflow. By measuring how much air you exhale, and how quickly, spirometry can evaluate a broad range of lung diseases. In a spirometry test, while you are sitting, you breathe into a mouthpiece that is connected to an instrument called a spirometer. The spirometer records the amount and the rate of air that you breathe in and out over a period of time. When standing, some numbers might be slightly different. The most important issue is to perform the test always while at the same position.
For some of the test measurements, you can breathe normally and quietly. Other tests require forced inhalation or exhalation after a deep breath. Sometimes you will be asked to inhale the substance or a medicine to see how it changes your test results.
Lung volume measurement can be done in two ways:
- The most accurate way is to sit in a sealed, clear box that looks like a telephone booth (body plethysmograph) while breathing in and out into a mouthpiece. Changes in pressure inside the box help determine the lung volume.
- Lung volume can also be measured when you breathe nitrogen or helium gas through a tube for a certain period of time. The concentration of the gas in a chamber attached to the tube is measured to estimate the lung volume.
To measure diffusion capacity, you breathe a harmless gas, called a tracer gas, for a very short time, often for only one breath. The concentration of the gas in the air you breathe out is measured. The difference in the amount of gas inhaled and exhaled measures how effectively gas travels from the lungs into the blood. This test allows the doctor to estimate how well the lungs move oxygen from the air into the bloodstream.
How to Prepare for the Test
Do not eat a heavy meal before the test. Do not smoke for 4 to 6 hours before the test. You will get specific instructions if you need to stop using bronchodilators or inhaler medications. You may have to breathe in medication before or during the test.
How the Test will Feel
Since the test involves some forced breathing and rapid breathing, you may have some temporary shortness of breath or light-headedness. You breathe through a tight-fitting mouthpiece and you will have nose clips. If you are claustrophobic, the clear box part of the test may feel uncomfortable.
Why the Test is Performed
Pulmonary function tests are done to:
- Diagnose certain types of lung disease (such as asthma, bronchitis, and emphysema)
- Find the cause of shortness of breath
- Measure whether exposure to chemicals at work affects lung function
- Check lung function before someone has surgery
It also can be done to:
- Assess the effect of medication
- Measure progress in disease treatment
Normal values are based upon your age, height, ethnicity, and gender. Normal results are expressed as a percentage. A value is usually considered abnormal if it is less than 80% of your predicted value.
Normal value ranges may vary slightly among different laboratories. Talk to your doctor about the meaning of your specific test results.
Different measurements that may be found on your report after pulmonary function tests include:
- Diffusion capacity to carbon monoxide (DLCO)
- Expiratory reserve volume (ERV)
- Forced vital capacity (FVC)
- Forced expiratory volume (FEV)
- Forced expiratory flow 25% to 75%
- Functional residual capacity (FRC)
- Maximum voluntary ventilation (MVV)
- Residual volume (RV)
- Peak expiratory flow (PEF).
- Slow vital capacity (SVC)
- Total lung capacity (TLC)
What Abnormal Results Mean
Abnormal results usually mean that you may have chest or lung disease.
Some lung diseases (such as emphysema, asthma, chronic bronchitis, and infections) can make the lungs contain too much air and take longer to empty. These lung diseases are called obstructive lung disorders.
Other lung diseases make the lungs scarred and smaller so that they contain too little air and are poor at transferring oxygen into the blood. Examples of these types of illnesses include:
- Extreme overweight
- Fibrosis of the lungs
- Lung cancer
- Sarcoidosis and scleroderma
Muscular weakness can also cause abnormal test results, even if the lungs are normal, similar to the diseases that cause smaller lungs
The risk is minimal for most people. There is a small risk of collapsed lung (pneumothorax) in people with a certain type of lung disease. The test should not be given to a person who has experienced a recent heart attack, has certain other types of heart disease, or has had a recent collapsed lung.
Your cooperation while performing the test is crucial in order to get accurate results. A poor seal around the mouthpiece of the spirometer can give poor results that can't be interpreted. Do not smoke before the test.
Hegewald MJ, Crapo RO. Pulmonary function testing. In: Mason RJ, Broaddus VC, Martin TR, et al., eds. Murray and Nadel's Textbook of Respiratory Medicine. 5th ed. Philadelphia, PA: Elsevier Saunders; 2010:chap 24.
Reynolds HY. Respiratory structure and function: mechanisms and testing. In: Goldman L, Schafer AI, eds. Goldman's Cecil Medicine. 24th ed. Philadelphia, PA: Elsevier Saunders; 2011:chap 85.
Reviewed By: Denis Hadjiliadis, MD, Associate Professor of Medicine, Pulmonary, Allergy, and Critical Care, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA. Also reviewed by David Zieve, MD, MHA, Bethanne Black, and the A.D.A.M. Editorial team.